At FlatPanel Audio, we have chosen to partner with LEA Professional for audio amplification. LEA's dedication to being extremely installer friendly, as well as having excellent technical support, is capped only by the quality of the amplifiers. DML500 has never sounded as good as they do with LEA's 96 Khz DSP.

If you are at the point of choosing your amplifiers, we strongly encourage the use of LEA - we're so confident that we extend our warranty to 6 years, if purchased with LEA amplifiers (you then get 6 years of amp warranty, and 6 years of loudspeaker warranty.) Please read the following article, where we describe our reasons for choosing LEA, and why we feel it's the best choice:

Article: Why Do We Strongly Recommend LEA Amplifiers?

We also understand that there are many other reasons why you may need to uses a brand of amplifier other than LEA. 

For LEA Amplifiers

For FlatPanel loudspeaker DSP settings for LEA amplifiers, please download our LEA Speaker Tunings ZIP package at the link below.

Article:  LEA Speaker Tunings Package

NOTE: You may download the entire zip package, or preview online and select only the configuration you need. Please don't forget the ReadMe File!

For Non-LEA Amplifiers

We've got you covered!

Our LEA Speaker Tuning package contains loudspeaker tunings specific to the system configuration - in other words, using DML500 with LS208, we have the settings for use in that specific configuration.

Our LEA Speaker Tunings Package also contains a ReadMe document with instructions. Included in this document are the crossover, filter, and limiter settings in text format for use in other amplifier and DSP brands. You can download this ReadMe file directly at the link below:

Article:  Text-based Speaker Tunings for other Amplifiers/DSP

Please note: DML500 can easily reach its maximum mechanical limits if it is forced to produce sound below 85hz while being driven with significant power. Extended operation below 85hz at high power can cause damage to the DML module. If your DML starts to "rattle" loudly - please discontinue your content and double-check that your high-pass filter is enabled, and set above 85hz.

Don't forget limiter settings!

Accompanying the filter settings in the ReadMe file PDF are the limiter settings for each of our loudspeakers. Please be sure to carefully set the limiters per this table, and enable the limiters. If your brand of DSP does not have the exact same parameter choices as we have below, please feel free to contact us and we can help you cross-reference to your brand of amplifier DSP.